Select Page

N7505XXUDPB1 Android 5.1.1 Galaxy Note 3 Neo SM-N7505

N7505XXUDPB1 Android 5.1.1 Galaxy Note 3 Neo SM-N7505
N7505XXUDPB1 Android 5.1.1 Lollipop Official Firmware for Samsung Galaxy Note 3 Neo LTE SM-N7505 is now available and you can manually download it from here on Yes Android, because I’m always offering Galaxy Firmware Download ((Galaxy Firmware Original, Galaxy Firmware Update/Upgrade)) and also installing it using our Galaxy Firmware Update Complete Installation Guides that will help you installing the Official Galaxy Firmware Update without any problems, also you can watch the short Video at the end of this post to learn How to Update any Samsung Firmware with Odin. So if you have Galaxy Note 3 Neo SM-N7505 and want to get this N7505XXUDPB1 Android 5.1.1 Lollipop update for it, you must know that there are several ways to Install Galaxy Firmware Update, these ways that I will explain is, the official methods and the manual method. The manual method is not recommended if you can get this Galaxy Firmware Update with the official methods, so I advise you to use the manual method only when you can’t get this Galaxy Firmware Update with the official methods (Through Samsung Kies or OTA). Now I will help you here to get the update through both ways by following this installation guide to learn how to install this Official Firmware Update on your phone easily.

N7505XXUDPB1 Android 5.1.1 Galaxy Note 3 Neo SM-N7505

Detailed Technical Datasheet of Samsung SM-N7505 Galaxy Note 3 Neo LTE+

Brand: Samsung
Manufacturer: Samsung Electronics
Hardware Designer: Samsung Electronics
Release Date: February, 2014

Physical Attributes

Dimensions(width x height x depth): 77.4 x 148.4 x 8.6 millimetres
3 x 5.8 x 0.3 inches
Bounding Volume: 98.8 cubecentimetres
Mass: 162.5 grams (battery included)

Software Environment

Embedded Operating System: Google Android 4.3
Kernel: Linux 3.4.39

Microprocessor, Chipset

CPU Clock: 1700 MHz
CPU: Samsung Exynos 5 Hexa 5260
Width of Machine Word: 32 bit
CPU Core: 2x ARM Cortex-A15 MPcore + 4x ARM Cortex-A7 MPcore
Instruction Set: ARMv7

Memory, Storage capacity

RAM capacity: 2048 MiB, 1714MiB accessible
ROM type: Flash EEPROM
ROM capacity: 15258 MiB, including 11300MiB user-accessible non-volatile storage
ROM capacity in bytes: 16 GB (billion bytes)

Graphical subsystem

Display Type: color Super Active Matrix OLED display
Display Color Depth: 24 bit/pixel (16777216 scales)
Display Diagonal: 5.5 ” (139.52 millimetres)
Display Resolution: 720 x 1280 (921600 pixels)
Viewable Display Size: 2.69 ” x 4.79 ” (68.4 x 121.6 millimetres)
Pixel density (dot pitch): 267.4 pixel/inch (0.095 millimetre/pixel)
Graphical Controller: ARM Mali-T624
Video out: Supported
USB Series Micro-B (Micro-USB) with MHL connector

Audio Subsystem

Audio Channel(s): stereo
Microphone(s): stereo
Loudspeaker(s): mono
Audio Output: 3.5mm plug

Cellular Phone

Cellular Networks: GSM850, GSM900, GSM1800, GSM1900, UMTS850 (B5), UMTS900 (B8), UMTS1900 (B2), UMTS2100 (B1)
Cellular Data Links: GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA+
Cellular Antenna: Internal antenna
Call Alert: 64 -chord melody (polyphonic)
Vibrating Alert: Supported
Speakerphone : Supported

Secondary Cellular Phone

Dual Cellular Network Operation: Dual standby
Secondary Cellular Networks: LTE2100 (B1), LTE850 (B5), LTE1800 (B3), LTE2600 (B7), LTE900 (B8), LTE800 (B20)
Secondary Cellular Data Links: LTE, LTE-A
Secondary Cellular Antenna: Internal antenna

Control Peripherals

Positioning Device: Multi-touch screen
Primary Keyboard: Not supported
Directional Pad: Not supported
Scroll Wheel: Not supported


Expansion Interfaces: microSD, microSDHC, TransFlash, microSDXC
Supports High Capacity (SD 2.0/HC) memory cards with capacity of up to 32GB
USB: USB 3.0 host/client, Hi-Speed (480Mbit/s), USB On-The-Go 1.3 compliant
USB Series Micro-B (Micro-USB) connector
Bluetooth (802.15): Bluetooth 4.0, Internal antenna
Wireless LAN/Wi-Fi (802.11): IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Internal antenna
Infrared Gate: Supported

Multimedia Broadcast

Analog Radio: Not supported
Digital Media Broadcast: Not supported

Satellite Navigation

Built-in GPS module: Supported
GPS Protocol: NMEA 0183
GPS Antenna: Internal antenna
Complementary GPS Services: Assisted GPS, QuickGPS, Geotagging, Simultaneous GPS (S-GPS)

Built-in Digital Camera

Sensor Type: CMOS sensor
Resolution: 3264 x2448 pixels (7.99MP)
Autofocus (AF): Supported
Optical Zoom: 1 x
Macro Mode: Supported
Built-in Flash: mobile light (LED)
Camcorder: 1920×1080 pixels , 30frame/sec
Recordable Image Formats: JPG
Recordable Video Formats: 3GP, 3G2, MPEG4

Built-in Secondary Digital Camera

Sensor Type: CMOS sensor
Resolution: 1920 x1080 pixels (2.07MP)
Camcorder: 1920x1080pixels , 30frame/sec
Recordable Image Formats: JPG
Recordable Video Formats: 3G2

Power Supply

Battery Technology: Lithium-ion battery
Battery Layout: removable
Battery Capacity: 3100 mAh

Additional Details

Built-in accelerometer: Supported
Additional Features:
  • capacitive touchscreen
  • Corning Gorilla Glass 3 screen
  • built-in digital compass
  • GPRS Class 12
  • EDGE Class 12
  • HSPA+ 42Mbps
  • HSUPA 5.76Mbps
  • LTE 150/50Mbps
  • active noise cancellation
  • Samsung TouchWiz UX
  • SoundAlive
  • Touch Focus
  • Panorama Shot
  • WiFi Direct
  • HT80
  • WiFi Mobile Hotspot
  • proximity sensor
  • light sensor
  • gyro sensor
Datasheet State: Final specifications
Datasheet Views: 25250 times
Datasheet Added: Jan 17, 14 15:09:52

You can install and update Official Galaxy Note 3 Neo SM-N7505 firmware N7505XXUDPB1 Android 5.1.1 Lollipop by following one of the following methods in our Galaxy Firmware Update Complete Installation Guide. You can choose one method only to Update Galaxy Note 3 Neo SM-N7505 Firmware, both methods have same result.

I always advise you to update your Firmware to fix bugs and Errors. Firmware Update also will increase the performance of your Samsung device and sometimes add some features, so it is recommended for you to update the firmware once it’s available.

Related to Galaxy Note 3

N7505XXUDPB1 Android 5.1.1 Galaxy Note 3 Neo SM-N7505

N900W8UBU2DOL1 Android 5.0 Galaxy Note 3 SM-N900W8

How to install N9005XXUGBOH8 Android 5.0 LOLLIPOP on GALAXY Note 3 LTE SM-N9005 [Full Guide]

Install and Update N9005XXUGBOG2 Android 5.0 Lollipop on Galaxy Note 3 LTE SM-N9005 [Full Guide]

Install and Update N9005XXUGBOJ1 Android 5.0 Lollipop on Galaxy Note 3 LTE SM-N9005 [Full Guide]

Install and Update N9005XXUGBOI6 Android 5.0 Lollipop on Galaxy Note 3 LTE SM-N9005 [Full Guide]

Note :  Yes Android team are not responsible for any damage caused in your device , so be careful please and do that the right way and at your own risk. Also don’t use this Firmware Update with any other model number, this firmware for SM-N7505 only.

Before doing anything please do a Backup for your important data to avoid data loss, also make sure that your device battery is fully charged or 75% at least. See this simple guide to learn How to Backup and Restore your Android Phone or Tablet

You are now reading N7505XXUDPB1 Android 5.1.1 Galaxy Note 3 Neo SM-N7505

After Downloading this Firmware Update File, don’t forget to follow the below Tutorial Link to learn How to Flash This Firmware File.

Download : N7505XXUDPB1_N7505OXXDPB2_TPH

Details of N7505XXUDPB1 Android 5.1.1 Lollipop Official Firmware Update For Galaxy Note 3 Neo SM-N7505:

XXUDPB1 Firmware Details :

Model :              SM-N7505
Model Name :   Galaxy Note 3 Neo
Country :           Portugal (TPH)
Version :            Android 5.1.1
Changelist :       5905507
Product Code :  TPH
PDA :                N7505XXUDPB1
CSC :                 N7505OXXDPB2
Romania [N7505XXUDPB1] : N7505XXUDPB1_N7505OXXDPB2_ROM
Slovakia [N7505XXUDPB1] : N7505XXUDPB1_N7505OXXDPB2_ORX 

Bulgaria [N7505XXUDPB1] : N7505XXUDPB1_N7505OXXDPB2_BGL
Czech Republic [N7505XXUDPB1] : N7505XXUDPB1_N7505OXXDPB2_ETL

To Download, Install, and Update Galaxy Note 3 Neo SM-N7505 Firmware to N7505XXUDPB1 Android 5.1.1 Lollipop for another Countries/Carriers go to this page and select your Country/Carrier to download it’s firmware.

Now, you have the Firmware Update File, so you will need this tutorial to know How to Update Samsung Galaxy Official Firmware that you have just downloaded. 

If you faced a problem and can’t flash this firmware on your GALAXY Note 3 SM-N900W8 with Odin and have a FAIL message on Odin and this log code ” <ID:0/004> FAIL! (Ext4) ” , so you should know that happen because of ROM size . If you looked into your phone when it in download mode you will find Error message in red color says “Volume size is too big 102400 < 204800 ” (You may find another numbers). To resolve this problem you have to download a PIT file and choose it from PIT tab in Odin and start again.

Download CSB_signed_HLTE_EUR_OPEN_32G_0805.pit file for GALAXY Note 3 SM-N900W8

After downloading this PIT file do all the previous steps in the tutorial and choose PIT tab then click on PIT button and choose the CSB_signed_HLTE_EUR_OPEN_32G_0805.pit , after that click start and enjoy!!!

Leave a reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.